77X INSTALLATION & OPERATION MANUAL
771/772/773/774 MODELS
25
7.10 Settings Menu
The SETTINGS menu (Figures 7.15 and 7.16) provides dispenser information and access to some settings that are
adjustable. Available settings options change based on dispenser software.
• SERIAL #: Set the serial number of the dispenser (this is used for BevTrak
TM
reporting).
• BARRELS: Provides the number of barrels for the dispenser.
• DISPLAY UNITS: Set the units of measurement to IMPERIAL or METRIC.
• ACTIVE CHARGE: Enabled for dispensers with DCC*.
• CONDENSER TYPE: Displays type of refrigeration for dispenser (LOCAL AIR, REMOTE AIR, WATER-COOLED).
• BEATER ALWAYS ON: For dispensers with the energy savings option to turn off motors intermittently, this
setting, if ENABLED, allows for beater motors to remain on at all times.
There are also four additional submenus that can be updated/set-up based on dispenser model to adjust different drink
characteristics.
• GAS CONFIGURATION: Used to display and, based on dispenser model, select the gas that will be used in the
dispenser (Figures 7.17 and 7.18).
• DRINK TYPE CONFIGURATION: Used to configure the drink type (medium or high expansion) based on selected
gas (Figure 7.19). Settings will only be available on dispensers with multi-gas, multi-flavor functionality.
• EXPANSION ADJUSTMENT: Used to adjust the amount of gas in a drink (Figure 7.20). The range of values is
limited based on the configured gas and drink type.
• FREEZE ADJUSTMENT : Used to adjust how frozen the drink is (Figure 7.21).
Figure 7.15
* DCC - Dynamic Charge Control
Figure 7.16
To Next Page
Loading...
