ST100A Series Flow Meter OPERATION
Fluid Components International LLC 67
Command 46: Trim DAC Gain – Measured Current Chan #1 (in mA)
Ext. Measured Current Ch. #1 Level (20 mA GainDAC)
Actual Measured Current Ch. #1 Level (20 mA GainDAC)
See Table 17, page 74, for response code list.
Note: 1. The value returned in the response data bytes reflects the rounded or truncated value actually used by the device.
Note: 1. The value returned in the response data bytes reflects the value actually used by the device.
Command 50: Read Dynamic Variable Assignments
Device Variable assigned to the primary variable.
See Table 17 for response code list.
Command 51: Write Dynamic Variable Assignments
Device Variable assigned to the primary variable.
Device Variable assigned to the primary variable.
See Table 17 for response code list.
To Next Page
Loading...
