To Next PageTo Next Page
Need help?Do you have a question about the FCI FLT93F and is the answer not in the manual?
General| Technology | Thermal Dispersion |
|---|---|
| Probe Type | Insertion |
| Repeatability | ±0.5% reading |
| Approvals | FM, CSA, ATEX, IECEx |
| Output | 4-20 mA, HART |
| Process Connection | Flange |
| Wetted Materials | 316L Stainless Steel |
| Measurement Range | 0.01 to 500 SFPS [0.003 to 152.4 NMPS] |
| Accuracy | ±1% reading |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Dimensions | Varies depending on model and options |
| Weight | Varies depending on model and options |
| Power | 24 VDC ±10% |
| Power Supply | 24 VDC ±10% |
Procedures for wiring enclosures, including disconnect devices.
Steps for proper enclosure grounding to ensure Ex-compliance.
Instructions for wiring the control circuit in a local enclosure.
Instructions for wiring the control circuit in a remote enclosure.
Instructions for connecting input power to the instrument.
Overview of methods for establishing alarm setpoints.
Detailed procedure for numerically setting alarm setpoints.
Procedure for setting alarms in air/gas flow applications.
Procedure for setting a high flow alarm.
Procedure for setting alarms for dry conditions in level sensing.
Procedure for setting alarms for wet conditions in level sensing.
Procedure for setting alarms in liquid flow applications.
Procedure for setting a low flow alarm in liquid applications.
Procedure for setting a high flow alarm in liquid applications.
Procedure for setting a high temperature alarm.
Procedure for setting a low temperature alarm.
Diagnosing issues related to the flow element and its readings.
Diagnosing problems with the control circuit, LED, and fuses.
Information on how to contact FCI for support and service.
