FCI ST80 Series - User Manual

06EN003490 Rev. B

Summary

General Information

Safety Instructions

Critical safety warnings regarding installation, hazardous areas, and ESD precautions.

Technical Specifications

Instrument Measuring Capability

Accuracy

Installation Procedures

Warnings and Precautions

Important warnings regarding installation, temperature, electrostatic charge, and battery replacement.

ST80 Insertion Sensor Installation

Detailed steps for installing the ST80 insertion sensor, including location and connection types.

ST80 L In-line Process Connection

Instructions for connecting the ST80L in-line flow element to the process piping.

Instrument Wiring

Instructions for powering the transmitter and recommended wiring practices.

Operation and Configuration

Basic Commissioning and Start-Up

Steps for initial power-up, verification, and basic instrument configuration.

ST80;ST80 L Configuration Software

Introduction to the Windows software for comprehensive instrument programming.

Flow Filtering

Adjusting flow filtering using output damping and moving average filters for signal smoothing.

NAMUR Setup

Maintenance Procedures

General Maintenance Guidelines

Power Fuse Replacement

Lithium Battery Replacement

Troubleshooting Guide

Troubleshooting the Flow Element

Verification of the Electronics

Constant Power Configuration Troubleshooting

FCI ST80 Series Specifications