© Copyright 2010 Fluid Components International LLC. All rights reserved. Subject to change without notice. Order Information Sheet effective 08/2013 Doc. No. 01SA011465 B Page 2 of 2
Accessories
Part Number
Description
FC88 Portable Hand-held Communicator
014108-02
PC Interface Communications Kit, for RS232 serial port connection
DM10-FC DM10 with FM and CSA approvals
DM10-KIT1 Panel Mount Kit for DM10
DM10-KIT2 2 inch (52 mm) Pipe Mount Kit for DM10 (stainless steel)
DM15
Digital Display/Readout, LED 115/230 Vac powered
DM15-ALM Same as DM-15 with user programmable alarm limit, relay output
(continued from previous page)
Code
[BLOCK 7
]
Transmitter Options
All standard
0
Standard
Code
[BLOCK 8
]
Interconnecting Cable Length for Remote Configurations
0
Not required (specify with integral configurations)
A
10 ′ [3 m]
B
25 ′ [7,6 m]
C
50 ′ [15 m]
W
Custom length (cannot exceed 50 ′ [15 m])
Notes
2. Must use FCI’s AVAL program to determine letter code. AVAL is a custom flow meter
optimizer program which considers gas medium, flow range, pipe size and other conditions
to determine best calibration and supplies FCI letter code to be used here. AVAL is available
online at www. fluidcomponents.com or consult your local FCI Representative.
4. Calibration accuracy is ±% of reading, ± 0.5% of full scale.
6. Flow element will be -FPC type with FCI patent-pending flow conditioner.
7. User configures line size, scaled flow range and engineering units in the field with PC, PDA
or FCI FC88 Calibrator.
To Next Page
Loading...
