User Control RANCO REPLACEMENT PARTS FOR THIS CONTROL NO
LONGER AVAILABLE - REPLACED BY THE CAREL CONTROL
Using The Electronic Control
This control is located behind the front base panel.
Temperature Control Knob
This controls the temperature of the display interior of merchandiser.
-OFF: Turning the control counterclockwise to the “WARM” setting is an
Off position, this position turns the refrigeration off and all indicator
lights will also be off at this setting.
-ON; The control will be on from the warmest setting at “1” and the coldest
setting at “COLD
Cooling light
This light will be on when control requires refrigeration to be on. The compressor /
condensing unit should be running to cool the case.
Defrost light
This light will be on when control when refrigeration is defrosting allowing ice to melt off
of evaporator coil. The number of times and length of defrost will vary depending on
case environment.
Alarm light
This light indicates that there is a problem with case or electronic control and service
should be called.
Refrigerated Self-Serve Merchandiser (High Profile) Page 9
To Next Page
Loading...