FeelElec
FY8300 Series User’s Manual
5
width and duty cycle. Max. frequency workable is 100MHz and Min.
frequency workable is 0.01 Hz.
◆ Channel SYNC Function: Support waveform copy and state copy between
channels.
◆ Support two or more signal generators connected to achieve multi-channel
output, the maximum support 16-channel synchronous output, the phase
between each channel can be adjusted.
◆ Precisely adjust the phases of the three channels, Precision can be 0.01°.
◆ Minimum amplitude resolution can be up to 1 mV. Amplitude range is
0~20Vpp.
◆ Duty-cycle of each channel can be adjusted independently0.01%-99.99%,
the adjusting resolution is 0.01%.
◆ -12V~+12V DC Offset function. Resolution 0.001V.
◆ Save function: It can save 12 sets user-set parameters and can be loaded at
any time.
◆ Communicating function: All functions can be controlled by PC program and
the communication protocol is open for secondary development.
◆ Output short-circuit protection: All channels can work more than 60 seconds
when the load is short-circuited.
◆ Provide powerful waveform editing PC software. Users can download
arbitrary waveform to this instrument after edit through PC program which is
included in user CD.
◆ Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide
range voltage power supply.
◆ Can choose our FYA2000S series or FPA2000 series power amplifier to
output 20W~100W signal in DC-10MHz width without any distortion.
To Next Page
Loading...
