Feig Electronic ID MAX50.10-E - Technical Data of the Reader Family ID CPR50.10-E;-RE

OBID
®
classic-pro Installation ID MAX50.10-E/-RE
FEIG ELECTRONIC GmbH Page 36 of 39 M90802-1de-ID-B-FCC.doc
E N G L I S H
9. Technical Data of the Reader Family ID MAX50.10-E/-RE
Housing for flush-mounting box
Dimensions (W x H x D)
Color
84 x 84 x 22 mm
Corpus: white / Face plate: black
Surface Adapter
Dimensions (W x H x D)
Color
77,7 x 77,7 x 18,0 mm
light grey
Weight
approx. 150 g
Protection class
IP 54
Supply Voltage
alternative:
- Power over Ethernet (PoE) IEEE802.3af (44 V to 54 V DC)
- external power supply 24VDC ±10%
Power consumption
max. 3,0 W
Temperature range
Operation
storage
-20 °C to +70 °C
-40 °C to +85 °C
Relative air humidity
95 % (non-condensing)
Antenna
internal (approx. 70 x 70 mm)
Operating frequency
13,56 MHz
RF Transmitting Power
250 mW ± 2 dB
RF-Interface
ISO14443-A, ISO14443-B, NFC
2
, ISO15693
Supported Transponder
e.g.: mifare
®
classic (mini, 1k, 4k), mifare
®
UltraLight,
mifare
®
DESfire, Smart MX, my-d
®
proximity, SLE44R35S,
Jewel
TM
, SLE66CL, ST19XR34, RF360, I•Code SLI, Tag-It
HFI, my-d vicintiy, STM LRI512, etc.
LED
blue (power and TCP/IP socket connection)
green (controlled by host)
red (controlled by host)
Buzzer
integrated
Realtime Clock
24h Power Reserve, Accuracy ±2s/day
Connector
LSA terminal
Relay (extern) ID MAX50.10-E 1 relay, connection via ID CPR.I/O-A
Relay (intern) ID MAX50.10-RE 1 relay, internal relay
Digital inputs ID MAX50.10-E
2 digital inputs, connection via ID CPR.I/O-A
Interface
Ethernet 10BASE-T/100BASE-TX
automatic MDI/MDI-X cross over correction
TCP/IP protocol
EEPROM
for configuration parameter (1 million write cycles)
Nonvolatile RAM
64kByte for Userdata, (10
14
Write Cycle)
2
NFC: Type 1, Type 2 and Type 4 in read/write and NFC card emulation mode