Feig Electronic VEK MNH1-R24-A User Manual

SENSORS
DE
ACHTUNG!
WICHTIGE SICHERHEITSHINWEISE!
Folgen Sie den Anweisungen auf Seite 3 dieser Anleitung.
FR
ATTENTION!
IMPORTANTES INDICATIONS DE SÉCURITÉ!
Les instructions de la page 3 de cette notice de montage
doivent être observées strictement.
ES
¡ATENCIÓN!
¡INDICACIONES IMPORTANTES DE SEGURIDAD!
Deben seguirse las indicaciones detalladas en página 3 de
estas instrucciones de montaje.
IT
ATTENZIONE!
INDICAZIONI SULLA SICUREZZA IMPORTANTI!
Prestare attenzione alle note alla pagina 3 delle presenti
istruzioni di montaggio.
NL
LET OP!
BELANGRIJKE VEILIGHEIDSINSTRUCTIES!
Volg de instructies op pagina 3 van deze
montagehandleiding op.
DA
PAS PÅ!
VIGTIGE SIKKERHEDSANVISNINGER!
Oplysningerne på side 3 i denne monteringsvejledning
skal følges.
VEK MNH
Traffic detector
Operating manual
EN
IMPORTANT!
Read carefully before use!
Keep for future reference!
Safety instructions on page 12!

Feig Electronic VEK MNH1-R24-A Specifications

General

Brand	Feig Electronic
Model	VEK MNH1-R24-A
Category	Security Sensors
Language	English

Summary

Product overview

Scope of delivery

Device components

Technical data

Lists comprehensive specifications, environmental conditions, and loop properties of the device.

Product description

Product versions

Product characteristics

Summarizes the key features, capabilities, and design aspects of the traffic detectors.

Product functions

Explains the main operational functions and setting options available for the traffic detectors.

Description of connections

Power supply

Guides the user on connecting the power supply, including voltage and safety requirements.

Loop inputs

Details the process and locations for connecting the induction loops to the detector.

Signal outputs

Explains the types of signal outputs, their configurations, and switching behaviors.

Assembly and electrical installation

Assembly on the DIN rail TS35

Provides step-by-step instructions for mounting the detector on a standard TS35 DIN rail.

Connecting the power supply

Details the procedure for safely connecting the power cable to the device.

Connect the relay outputs (versions -R24)

Outlines the connection process for the relay outputs on R24 variant models.

Connecting the open collector outputs (versions -024)

Details the connection procedure for the open collector outputs on 024 variant models.

Connecting the induction loops

Description of functions

LED status indicators

DIP switch settings

Detector Tool service program

Introduces the Detector Tool software for advanced configuration, diagnostics, and data analysis.

Description of settings

Adjusting sensitivity (switch-on threshold)

Provides guidance on setting the sensitivity and switch-on threshold for optimal vehicle detection.

Setting hysteresis (switch-off threshold)

Setting loop frequency (frequency step)

Setting hold time

Setting output mode (signal type)

Behaviour in the event of loop error (error mode)

Assigning an output to a loop (Assignment)

Setting output switching time (impulse time)

Setting output times (output time behaviour)

Setting direction detection (dual-channel variants)

Setting direction logic (dual-channel variants)