Fein BOP 6 - Page 57

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
C-SC_CSSM
Version 1.0
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 57 of 65
Fitting the gearbox housing [applies to: BOP 13-2 (A)]
1. Apply a layer of grease to the six balls (1).
2. Insert the six balls (1).
3. Position the gear-wheel [z=28] (2).
4. Position the gear-wheel [z=24] (3).
5. Position the disc (4).
Tools:
- Forceps
2
1
3
4