BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
4. Tools required
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Standard tools Special tools
Open-ended spanner
(width = 4 mm)
17 mm Drawing-off socket cap 6 41 04 150 00 8
Socket head wrench 10 mm Chuck cone, 15 mm diameter 6 41 07 015 00 1
Arbor press Chuck cone, 19 mm diameter 6 41 07 019 00 7
Punch 7 mm diameter Assembly aid 6 41 22 121 01 0
Plastic hammer Assembly aid 6 41 31 017 00 0
Circlip pliers
Torx T20
Slotted screwdriver
Slotted screwdriver (small)
Combination pliers
Inner puller
Cross-tip screwdriver PH1; PH2
Forceps
Sleeve 33 mm inner diameter
43 mm inner diameter
13 mm inner diameter
17 mm inner diameter
To Next Page
Loading...
