FEIN – REPAIR - TOOLS
All rights reserved by FEIN, especially in case of industrial rights registration.
Any power of disposition such as copying and right of transfer is situated with FEIN.
Sahre / MVK 05 / 2011
Magnet switch flashing code
Flashing code Frequency Possible fault
regular: slow
100ms ON
100ms OFF
Magnet power too low
regular: fast
48ms ON
48ms OFF
Magnet current too high
Drill stand temperature too high
long-short
400ms ON
100ms OFF
Magnet holding force reduced to 50%
Electronic drill stand defective
Magnet current too low, magnet possibly defective
communication error between drill stand and drill
motor
To Previous Page
Loading...
