FEIYUTECH AK2000S - Power ON;OFF

www.feiyu-tech.com 8
2.4.2 Balance roll axis
·Turn the camera lens forward.
·Unlock the safety lock(red).
·Loosen the lock screw (red).
·Move the camera to balance.
·Tighten the lock screw after balanced.
2.4.3 Balance pan axis
·Hold the handle aslant to 15°~20°.
·Loosen the lock screw (red).
·Move the camera to balance.
·Tighten the lock screw after balanced.
2.5 Power ON/OFF
Be sure to unlock the position lock before using the gimbal.
Long press power button, release the button until it shows
on display.