Fellowes Jupiter 125 - Maintenance and Support; Troubleshooting Common Issues; Limited Warranty Information

http://www.monomachines.com
I
MAINTENANCE - Unique Easi-A((ess technology
This laminator is equipped with the unique Easi-Access technology for easy maintenance. This allows the user to open the laminator for maintenance, just like a photocopier.
1. To open the laminator, please press
2.lf machine is hot, fan will turn on to cool 3. The "Wait" LED will turn off and the
the
"Open" (-t) button as shown in the machine down to safe handling temperature ready beep will sound when machine is
the illustration. The red Open light will inside. During this time the "Wait" symbol ready to be opened.
4. Press the silver buttons on both sides of
the machine to activate the Easi-Access (The
laminator needs to be switched on to allow
illuminate.
5
will f~sh and cover will remain locked.
the active rature control to
5. Open the lid with both hands.
You are now able to clean the inside of
the laminator and carefully remove any
residual glue or other items.
When laminator is opened, power to
internal parts is isolated, so that user is
not in danger of electric shock.
TROUBLESHOOTING
6. For further maintenance, the rollers
can be released by experienced users.
Press cam levers to release the rollers.
7. To clean residue off laminator rollers,
please only use Fellowes Laminating
Roller wipes (item No 5703702) as
8. Please remember to re-secure the
rollers before closing cover to ensure
safe operation.
explained in their product instructions.
Problem
Ready light does not go on after extended time
Pouch did not completely adhere to item
Jamming
Need Help?
PI.us. ,oil our experk 01
(uslomer Service_ You'll find
the numbers for your nearest
Service Centre on the
bo,k cover of Ihis bookl.t.
LIMITED WARRANTY
Cause
Laminator is in a hot, humid area.
Laminated item may be too thick.
No item in pouch
Manually cut out pouch used
Pouch was not used.
Pouch was not centred or straight when fed
through Pouch/Document Entry.
Glue and residue left on laminating rollers.
Solution
Move laminator to a cool dry area.
Pass through laminator a second time.
All our laminators have been designed to operate jam-free. In the unlikely
event of a jam occurring, please press the 'open" ( .... ) button and wait
for the wait (~) light to stop flashing.
The laminator can be opened to remove incorrectly inserted items
as described under maintenance. Please ensure tnat you follow the
described steps.
Gently pullan the jammed material to release it.
Always put item in a pouch.
Align sealed edge with Pouch/Document Entry. Use guide
on machine to centre.
Clean residues off rollers using Fellowes Laminating Roller wipes, see
"maintenance" section.
Make sure that not residue is left on the rollers and use
cleaning sheet before laminating.
Fellowes warrants all ports of the laminator to be free of defects in material and workmanship for 2 years
from the dote of purchase by the original consumer. If an y port is found to be defective during the warranty
period, y our sale and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of
the defecti ve port. This warranty does not appl y in cases of abuse, mishandling or unauthorized repair. ANY
IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL DA MA GES ATTRIBUT A BLE TO THIS PRODUCT. This warrant y
gives y ou specific legal rights. You ma y have other legal rights that var y from this warranty. The duration,
terms and conditions of this warranty are valid world-wide, except where different limitations, restrictions or
conditions may be required by local law. For more details or to obtain services under this warranty, please
contact us or your dealer.
s
http://www.monomachines.com