To Next PageTo Next PageHow to turn on Fellowes Laminator if there is no light?
If the ‘blue’ Power on LED is not glowing on your Fellowes Laminator, ensure the machine is switched on at the right rear side and at the wall socket. Then, press the power standby button.
What to do if my Fellowes Laminator pouch doesn't seal completely?
If your Fellowes Laminator pouch isn't sealing completely, it might be because the item you're trying to laminate is too thick. To resolve this, try passing the pouch through the laminator a second time.
Why is my Fellowes jupiter 2 125 pouch damaged after lamination?
If your Fellowes Laminator pouch is damaged after lamination, it could be due to damaged rollers or adhesive on the rollers. Try passing cleaning sheets through the machine to test and clean the rollers.
General| Laminating Width | 12.5 inches |
|---|---|
| Temperature Settings | 3 |
| Max Pouch Thickness | 10 mil |
| Auto Shut-off | Yes |
| Warm-up Time | 60 seconds |
