Why is the 'ready' lamp not turning on after a long time on my Fellowes Lunar A3?
If the green 'ready' lamp on your Fellowes Laminator doesn't light up after a while, the machine may be in a hot or humid area. Move it to a cooler, drier location.
How to fix Fellowes Lunar A3 Laminator when the power on lamp is not working?
If the red 'power on' lamp isn't lit on your Fellowes Laminator, the machine might not be switched on. Check that the machine is switched on both at the front and at the wall socket.
How to fix a Fellowes Lunar A3 that doesn't completely seal?
If the pouch does not completely seal the item in your Fellowes Laminator, it could be that the item is too thick for lamination. Ensure the correct pouch thickness is selected, and then run it through the laminator again.
Why is the power light off on my Fellowes Lunar A3?
If the ‘power on’ lamp (red LED) is not illuminated on your Fellowes Laminator, it's possible that the machine isn't switched on. Make sure the machine is turned on both at the front and at the wall socket.
Why no ready lamp after a long period on Fellowes Laminator?
If the ‘ready’ lamp (green LED) on your Fellowes Laminator takes a long time to light up, the machine might be in a hot or humid environment. Move the laminator to a cooler, drier area.
What to do if the Fellowes Lunar A3 Laminator pouch has waves or bubbles?
If your Fellowes Laminator pouch comes out with waves or bubbles, the temperature setting might be incorrect. Verify that the pouch thickness is correctly selected and pass it through the laminator again.
How to fix Fellowes Lunar A3 if pouch is lost in the machine?
If a pouch gets stuck inside your Fellowes Laminator, it means the pouch is jammed. Press the reverse button and gently pull the item out by hand.
What to do if Fellowes Lunar A3 Laminator pouch does not completely seal the item?
If your Fellowes Laminator pouch isn't sealing the item completely, it might be too thick to laminate. Check that the pass-through thickness is correctly selected, and then pass it through the laminator again.
What to do if Fellowes Lunar A3 Laminator pouch is damaged after lamination?
If the Fellowes Laminator pouch is damaged after lamination, the rollers may be damaged, or there may be adhesive on them. To test and clean the rollers, pass cleaning sheets through the machine.
Why is the pouch damaged after lamination in Fellowes Lunar A3 Laminator?
If your Fellowes Laminator pouch is damaged after lamination, it could be due to damaged rollers or adhesive buildup. Try running cleaning sheets through the machine to test and clean the rollers.
General| Type | Hot laminator |
|---|---|
| Product color | White |
| Preheating time | 6 min |
| Built-in display | No |
| Housing material | Plastic |
| Lamination speed | - mm/min |
| Number of rollers | 2 |
| Maximum lamination width | 320 mm |
| Maximum document thickness | 0.08 mm |
| Number of temperature settings | 1 |
| Harmonized System (HS) code | 84729080 |
Weight and Dimensions| Depth | 486 mm |
|---|---|
| Width | 150 mm |
| Height | 82 mm |
| Weight | 1580 g |
To Next Page
