EasyManuals Logo

Fender Cyber-Deluxe DSP 7 User Manual

Fender Cyber-Deluxe DSP 7
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
wwwwww
..
ffeennddeerr..ccoomm
wwwwww
..mmrrggeeaarrhheeaadd..nneett
28
Advanced Functions
Continuous Controller Device Number Setting
This menu item is used to select the Continuous Controller device number
that the Continuous Controller device uses.
1) Press UTILITY repeatedly until ”CC” is displayed (the display will then
alternate between “CC” and the current setting).
2) Select the desired device number with the DATA WHEEL. The range of
values is 01 to 100. Note that “00.” is displayed for device number 100.
The default setting, 11, is used by most CC pedal manufacturers.
MIDI Receive Channel Selection
This menu item is used to select the channel on which the Cyber–Deluxe™
amplifier receives MIDI channel messages (program and CC changes).
1) Press UTILITY repeatedly until “rc” is displayed (the display will then
alternate between “rc” and the current setting).
2) Select the desired channel with the DATA WHEEL. The range of values is
1—16, Omni (“On”) and Off (“OF”).
The default setting, Omni (“On”), enables the amplifier to respond to
channel messages on all channels. The Off (“OF”) setting configures the
amplifier to ignore all channel messages. System Exclusive messages will
still be accepted and processed if the receive channel is off.
MIDI Transmit Channel Selection
This menu item is used to select the channel on which the Cyber–Deluxe™
amplifier transmits MIDI channel messages (program and CC changes).
1) Press UTILITY repeatedly until “tc” is displayed (the display will then
alternate between “tc” and the current setting).
2) Select the desired channel with the DATA WHEEL. The range of values is
1—16 and Off (“OF”).
The default setting is, Off (“OF”). System Exclusive messages (MIDI data
dumps) can still be transmitted if the transmit channel is off.
System Exclusive ID Selection
This menu item is used to set the System Exclusive ID number for the
Cyber–Deluxe™ amplifier.
1) Press UTILITY repeatedly until “id” is displayed (the display will then
alternate between “id” and the current setting).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fender Cyber-Deluxe DSP 7 and is the answer not in the manual?

Fender Cyber-Deluxe DSP 7 Specifications

General IconGeneral
BrandFender
ModelCyber-Deluxe DSP 7
CategoryAmplifier
LanguageEnglish

Related product manuals