Appendix 5 SysEx ◊ Edit Preset Parameters
System Exclusive messages can also be used to edit individual
parameters/settings in the amplifier preset. This appendix contains tables
describing the System Exclusive message components and protocol for
editing preset parameters.
The System Exclusive device ID must be set to match to accomplish the
edit function.
NOTE: The nomenclature for values uses an H to designate that the one-
byte value is expressed in Hexadecimal (00H – FFH).
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
37
Appendices
System Exclusive Preset Edit Message
VALUE DESCRIPTION
F0H Start of System Exclusive Message
08H Fender Manufacturer ID
nnH nn = Device ID (minus one)
21H Amp ID number 21H. The upper nibble identifies the Cyber-Deluxe™ amplifier and the lower nibble designates software version.
05H Message ID number for additional parameter controls.
ddH Parameter ID number for additional parameter controls (See table below).
vvH Value for the parameter you wish to edit (See table below).
7BH End of System Exclusive File Byte
F7H End of System Exclusive Message
To Next Page
Loading...
Need help?
General