Fender PASSPORT P150 User Manual

A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
SPECIFICATIONS
Frequency 20 Hz to 40 kHz +/- 1 dB (at send output)
Response 30 Hz to 30 kHz +/- 1 dB
(at speaker output, with processor threshold exceeded)
Distortion <0.1%, 20 Hz to 20kHz 1 dB below rated output
System Signal to Noise Ratio >80 dB @ 1 w, “A” WTD
Power Output 75W/ch continuous average power, 8Ω, both channels
driven with THD < 1%
Input Impedance, Channels 1-2-3
XL and 1/4”
Switch Position Mic: 2 kΩ
Line: 66 kΩ
Input Impedance Phono: 78 kΩ
Stereo Channels1/4”: 78 kΩ
Maximum Input Level Mic: -7 dBu
Line: 30 dBu
Stereo: 26 dBu
Return Input Impedance 47kΩ
Fuse type T4A, 250V
Passport System
Width mm (in.)
Height mm ( in.)
Depth mm ( in.)
Weight kgs ( lbs)
Speakers
Width mm (in.)
Height mm (in.)
Depth mm (in.)
Weight kgs ( lbs)
Power Tower
Width mm ( in.)
Height mm (in.)
Depth mm ( in.)
Weight kgs ( lbs)
Tower Footprint x mm ( in. x in.)
Microphone: Dynamic Cardioid, balanced
Cables XL -M to XL-F, 6 m. (20 feet)
Speaker Cables 1/4 in. to 1/4 in., 9 m (30 feet)
0 dBu is referenced to 0.775 volts rms

Fender PASSPORT P150 Specifications

Frequency and Response

frequency range	20 Hz to 40 kHz +/- 1 dB
response	30 Hz to 30 kHz +/- 1 dB
distortion	<0.1%, 20 Hz to 20kHz 1 dB below rated output

Power Output and Signal

power output	75W/ch continuous average power, 8Ω
signal to noise ratio	>80 dB @ 1 w, “A” WTD
fuse type	T4A, 250V

Input Specifications

input impedance mic	2 kΩ
input impedance line	66 kΩ
input impedance phono	78 kΩ