REAR-PANEL FEATURES
37
MIDI
MIDI in and out/thru ports for interfacing with a variety of MIDI devices. See the Global Settings and MIDI sections for detailed information.
USB PORT
The rear-panel USB-C port is for connection to a Mac or PC, for use with the Tone Master PRO Control app and for routing USB audio. An
appropriate USB cable is required (depending on the external device being connected); a USB-C cable is included. See USB Audio section
for details on USB audio recording.
RESET
To initiate a factory reset, insert a paper clip into the RESET pinhole button while powering up Tone Master PRO. Note that performing a
factory reset will erase all presets and settings.
MICRO SD CARD SLOT
The rear-panel MICRO SD card slot is for future expansion of Tone Master PRO functionality.
UPDATE
The UPDATE button is for installing firmware updates when Tone Master PRO is connected to a Mac or PC using a USB-C cable. To initiate a
firmware update, press and hold while powering up Tone Master PRO, then follow the onscreen instructions. Visit www.fender.com/tonemas-
ter_pro to download firmware update file and instructions.
To Next Page
Loading...
