Fender Ultimate Chorus - Fender Ultimate Chorus Specifications

ULTIMATE CHORUS SPECIFICATIONS
TYPE: PR 204
PART NUMBER: 100V Version 022-6771-010
120V Version 022-6701-010
230V Version 022-6761-010
240V Version 022-6731-010
INPUT IMPEDANCE: INPUT 1 only - Greater than 1MΩ
INPUT 2 - 131kΩ
NOMINAL LEVEL: INPUT 1 only - 100 mV
INPUT 2 - 200mV
POWER OUTPUT: 65W R.M.S. per channel = 130W R.M.S.
RATED LOAD IMPEDANCE: 8 Ohms per channel
MONO EFFECTS LOOP: Nominal Level: -10dBV
Send Output Impedance: 1kΩ
Return Input Impedance: 25kΩ
STEREO EFFECTS LOOP: Nominal Level: -10dBV
Send Output Impedance: 1kΩ
Return Input Impedance: 14kΩ
(Specifications for each channel - Left on Tip, Right on Ring)
POWER REQUIREMENTS: 100V AC 50/60 Hz, 360W
120V AC 60 Hz, 360W
230V AC 50 Hz, 360W
240V AC 50 Hz, 360W
SPEAKER COMPLEMENT: Two 8Ω Fender
®
Special Design 12-inch speakers (P.N. 025923)
PHYSICAL
SPECIFICATIONS: Height: 18-1/2” (47cm)
Width: 26-1/8” (66cm)
Depth: 10-1/4” (26cm)
Weight: 47 lbs. (21.3kg)
SOUND: “KICKS @$$, in STEREO!”
WARNINGS: NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
THIS EQUIPMENT MUST BE EARTH GROUNDED.
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC