Fenix HL30 - Battery Specifications; Battery Replacement

Battery Specifications
Type
Dimensions
Nominal voltage
Usability
Ni-MH battery
AA
1.2V
Recommended
√
Alkaline battery
AA
1.5V
Usable
√
Non-rechargeable Battery
(Lithium)
AA
1.5V
Usable
√
Rechargeable Battery
(Li-ion)
14500
3.7V
Banned
×
Battery replacement
Pull the headlamp bracket open as the arrow indicates till it is separated from the base as shown
above.
Hold back the protrusions on the back cover with your fingers (as “open” indicates), and then pull
the back cover open.
Insert the nominal batteries with the cathode side (－) toward the spring.
Put the two snap joints towards each other, and then securely replace the cover before testing the
HL30’s power and functions.
Two snap joints