• Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light
to flicker, shine intermittently or even fail to illuminate for the following reasons:
A. The battery needs replacing.
a. Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s specifications).
B. The threads, PCB board contact or other contacts are dirty.
a. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact your authorized distributor.
Warning
This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the
flashlight directly into anyone’s eyes.
This flashlight will accumulate a lot of heat when used for extended periods, resulting in high temperature of the
flashlight shell.
To Previous Page
Loading...
