Fermax LOFT COMPACT VDS User Manual

10
Loft Compact VDSLoft Compact VDS
Loft Compact VDSLoft Compact VDS
Loft Compact VDS
Loft Compact VDSLoft Compact VDS
Loft Compact VDSLoft Compact VDS
Loft Compact VDS
BUTTONS
NOTE:
The monitor screen
goes on once the call
from the panel has
ended.
ENGLISH
Answering a call
When the call button on the Entry Panel is pressed a call tone is emitted both from the panel and
on the monitor, causing the screen to start up.
· Colour Monitor: Press the button to speak to the visitor. The audio channel between the entry
panel and the residence is open; operating in hands-free mode.
· B/W Monitor: Press the button to talk to the visitor and release it to listen.
The communication facility will automatically terminate after 90 seconds, or at any time
by pressing the button
. The LED will remain off whilst the conversation is underway.
If communication is not established with the street panel, the monitor will automatically go off after
30 seconds.
Manual Activation of the Monitor (Auto-start)
With the monitor on standby, hold down this button for 1 second to switch the monitor on
manually. To sequentially select between the main camera and the secondary camera (where one
exists), hold the button / down for 2 seconds.
To activate audio and talk to your visitor or open the door, take the steps described above.
If communication is not established with the entry panel, the monitor will automatically go off after
30 seconds. The communication facility will automatically terminate after 90 seconds, or at any
time by pressing the button .
Opening the door
When a call is received from the entry panel, it is possible to open the door at any time, by
pressing the button .
OPERATION
Hang-Up Button / Main-Secondary Camera Selection / Menu
· Press to terminate communication.
· With video, hold this button / down for 2 seconds to sequentially select between
the main camera and the secondary camera (where one exists).
· With the monitor on standby, hold down this button for 2 seconds to go into monitor
configuration mode. See the “Monitor Settings” section.
F1 and F2: Buttons for Additional Functions
(assigned by the installer).
Audio Activation Button and Autostart
· Colour Monitor: When a call is received, press this button to speak to the visitor. The audio channel
between the entry panel and the residence is open; operating in hands-free mode.
· B/W Monitor: When a call is received, press the button to talk to the visitor and release it to listen.
With the monitor on standby, hold down this button for 1 second to switch the monitor on manually (video
only). Press the button again to get audio.
Lock Release / Call Guard Unit Button
· The lock-release is activated by pressing the button with the monitor activated.
· Pressing this button whilst the monitor is on standby will result in a call being made to the
guard unit (where one exists).
F1
F1: _____________________________________
F2: _____________________________________
Colour
B/W

Fermax LOFT COMPACT VDS Specifications

General

Brand	Fermax
Model	LOFT COMPACT VDS
Category	Monitor
Language	English