24
2.13 RESTORE
Use this functionality to remotely reset the KIN panel, or to return it to factory settings. In both cases
it will ask for confirmation.
RESTORE FACTORY SETTINGS: The panel will automatically turn off and start up with the
factory settings. We refer below the essential default parameters for your reference.
GENERAL
• BLOCK: 1
• DEVICE: 1
• APARTMENT: 101 (for 1W panel operation)
• LANGUAGE: ENGLISH
• VIDEO RESOLUTION: 640 x 480
• INSTALLER PASSWORD:123456
NETWORK
• IP: 10.1.0.1
• MASK: 255.0.0.0
• GATEWAY: 10.254.0.1
• DNS: 8.8.8.8
• SOFTWARE IP: 10.0.0.200
Any other parameters (sip, IP cameras, concierges, etc.) that have been configured will also be
lost.
REBOOT DEVICE: The panel will automatically turn off and start up keeping all the
programming parameters.
When resetting, the device will lose connection with the PC. Refresh the website after about
60 seconds to resume the connection.
To Next Page
Loading...
