Fermax VEO DUOX

Menu Button.
· To access:
- Programming Menu, it is accessed when the monitor is not programmed.
From this menu, you can program the monitor according to your installation
needs.
- User Menu, (once the monitor is programmed). From this menu, you can
access the user settings and customise them as you wish.
LED
Red LED:
Intermittent fast blinking. Monitor not programmed.
Intermittent slow blinking. Indicates that the Do Not Disturb feature is enabled.
Switched on. Monitor is idle.
PROGRAMMING:
1. PROGRAMMING: ACCESS ADMINISTRATOR AND USER MENU
Screen: ADMINISTRATOR menu Screen: USER Menu
Do Not Disturb icons (Screen: User Menu) and Image Capture (User Menu Screen. User
Settings option) will change depending on whether they are enabled/disabled. If they
are enabled, a green tick will be displayed in the top right-hand corner of the icon,
whereas if it is disabled you will see a red cross
.
Induction Loop
INDUCTION LOOP Identifi ed with this label (depending on model). A version
of the VEO monitor with an inductive loop on the monitor receiver is avail-
able. See 97507 Telephone Receiver Inductive Loop on www.fermax.com.
· Includes an induction loop that works with devices worn by people with
hearing disabilities.
Note: In hearing aids with manual mode selection, the Digital Mode must
be set.
T
8 DUOX VEO MONITOR