If the power supply is cut off for any reason, the date and time settings will reset to the
default confi guration (01/01/2017). An icon will appear on the user menu and on the video
display warning that the date is incorrect.
Notes:
- You are not permitted to validate an incorrect date and time, and the closest date
and time will be suggested.
- Holding down the navigation icons - will cause the numbers to change more quickly.
4.5.3
User parameter settings:
ENABLE/DISABLE IMAGE CAPTURE
4.5.4 User parameter settings: USER RESET
With this option you can reset all settings to factory default values, keeping the address
already programmed into the monitor. Selecting and confi rming the option.
If you want to perform a reset, confirm the option.
With this option, you can enable or disable the automatic capture of images. Select the
image capture icon and press confi rm
to activate or deactivate it.
The monitor can take an automatic picture within 5 seconds of receiving a call from an
outdoor panel. According to the European Union legislation about data protection ((EU)
2016/679), the capture of images may be restricted. This feature is deactivated by default
in all monitors, although can be activated at your own responsibility.
Furthermore, the legislation may force to place a sign next to door stations, indicating
that monitors can capture images. You can download it at
https://www.fermax.com/intl/en/
corporate/utilities.html.
DUOX VEO MONITOR 17
To Next Page
Loading...
