EasyManua.ls Logo

Ferno Pegasus - Operating Procedure; Patient Transfer and Height Adjustment

Ferno Pegasus
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FERNO/MAN/01/18/159/UK 3 Pegasus Trolley
Important Notes
Always ensure that two operators are with the trolley at all times.
A non-laden trolley may be controlled by one operator provided it is considered
safe to do so.
When rolling the trolley in the elevated position along hospital corridors or
similar smooth surfaces, DO NOT use the pull handles, instead roll the trolley
by firmly grasping the main frame, for added control.
Trapping hazards cannot be eliminated due to the operation of this product.
EXTRA CARE to be taken whilst raising and lowering the trolley, operating leg
rest features and any features with hinge assemblies.
Before driving the ambulance, make sure that the trolley is secured with the
recommended locking device to prevent its movement in the patient
compartment.
REFER TO PAGES 9 & 10 IF USING PRODUCT WITH 2-PART TRACK-MOUNTED
FLOOR LOCK
This product must be regularly serviced and maintained in line with the
manufacturer’s recommendation to ensure satisfactory operation. A
preventative maintenance scheme should be contracted at time of purchase.
Regular cleaning helps reduce the risk of transmitting disease and enables the
equipment to function at its optimum.
PLEASE NOTE
Always ensure the drop down foot end and head end are in the raised
position before operating the lifting mechanism on the trolley.
PLEASE NOTE
Cot Sides are not intended to be used to either manoeuvre or lift the trolley,
damage may result from this practice.

Related product manuals