Ferno POWERFlexx - Page 4

4 © Ferno-Washington, Inc. 234-3310-01 May 2005
POWERFlexx
™
Safety and Instruction Labels ............................................ 6
Height and Strength Considerations.................................. 7
Components ....................................................................... 9
Cot Height ..................................................................... 10
Figure 1 - Safety Hook ..................................................11
Figure 2 - Engaging the Safety Hook ............................11
Figure 3 - Safety Hook Placement ............................... 12
Figure 4 - Installing the Safety Hook ........................... 12
Figure 5 - Old-Style and New-Style Mounting Blocks 13
Figure 6 - Updated Antler Shown After Rear
Mounting Block & Turn-Knob Replaced .... 13
Figure 7 - Operators Maintain Grasp on Cot
During Hydraulic Operation ........................ 14
Figure 8 - Main Power Switch ..................................... 14
Figure 9 - Touch Pad Controls ..................................... 15
Figure 10 - Press Anywhere in the Colored Area
to Operate the Touch Pad ............................ 15
Figure 11 - Battery Charge Indicator ............................. 15
Figure 12 - Manual Mode Handle .................................. 16
Figure 13 - Using the Manual Mode Handle ................. 16
Figure 14 - Battery Charger............................................ 17
Figure 15 - Cable Connections ....................................... 17
Figure 16 - Removing the Power Pack Module ............. 17
Figure 17 - Drop Frame Positions .................................. 18
Figure 18 - Adjusting the Drop Frame ........................... 18
Figure 19 - Safety Bar Release Handle .......................... 19
Figure 20 - Using the Backrest ....................................... 19
Figure 21 - Using the Sidearm ....................................... 20
Figure 22 - Lowering the Shock Frame.......................... 20
Figure 23 - Foot-End Lift Bar Positions ........................ 21
Figure 24 - Adjusting the Foot-End Hinges ................... 21
Figure 25 - Using the Lead Handle ................................ 22
Illustrations
Figure 26 - Wheel Lock.................................................. 22
Figure 27 - Restraints ..................................................... 23
Figure 28 - Attaching the Mattress ................................. 23
Figure 29 - Changing Cot Height ................................... 25
Figure 30 - Short Operators Using
Lower Lifting Positions ............................... 25
Figure 31 - Securing the Patient ..................................... 26
Figure 32 - Rolling the Cot............................................. 27
Figure 33 - Rolling the Cot............................................. 27
Using Additional Help ..................................................... 28
Figure 34 - Examples of Model 175
(Antler and Rail) Fasteners.......................... 29
Figure 35 - Cot Safety Bar on Safety Hook ................... 30
Figure 36 - Raising and Folding the Cot ........................ 30
Figure 37 - Loading the Cot ........................................... 30
Figure 38 - Unloading the Cot........................................ 31
Figure 39 - Disengaging the Safety Bar ......................... 31
Figure 40 - One Operator With Empty Cot .................... 31
Figure 41- Manual Mode: Non-Powered Loading
or Unloading the Cot ................................... 32
Minimum Intervals for Maintenance ............................... 33
Lubrication Diagram ....................................................... 35
Figure 42 - Battery Charger ............................................ 36
Figure 43 - Charger Connected to
Power Pack Module On Cot ........................ 36
Figure 44 - Charger Connected to Power Pack .............. 36
Figure 45 - Proper Handle Function............................... 37
Figure 46 - Place a Chock On the Lower Frame ............ 37
Figure 47 - Manual Mode Adjustment Nuts................... 37
Parts Diagrams ................................................................ 39
Serial Number Location .................................................. 41