48
Symbole
Putting the saw back into operation
• Remove spark plug.
• Pull starter rope briskly to clear excess oil from combustion chamber.
• Clean the spark plug and check that the electrode gap is correct.
• Prepare unit for operation.
• Fill fuel tank with proper fuel / oil mixture.
13. Transport
• To transport the chain, empty the fuel tank. Remove coarse dirt from the saw with a
brush or a hand brush.
14. Disposal and recycling
Notes for packaging
The packaging materials are recyclable. Please dispose of packaging in
anenvironmentally friendly manner.
Fuels and oils
• Before disposing of the unit, the fuel tank and the engine oil tank must be emptied!
• Fuel and engine oil do not belong in household waste or drains, but must be collected
or disposed of separately!
• Empty oil and fuel tanks must be disposed of in anenvironmentally friendly manner.
Storage/Transport/Disposal and recycling
To Next Page
Loading...
