Cleaning and maintenance
WARNING!
Risk of electric shock!
Improper handling of the device can cause electric shock.
- Always switch off the device and pull the mains plug out of
the socket before cleaning the device.
NOTE!
Risk of short circuit!
If water or other liquids enter the housing, they can cause a short
circuit.
- Never immerse the device in water or other liquids.
- Make sure that no water or other liquid gets inside the
housing.
NOTE!
Risk of damage!
Improper handling can damage the device.
- Do not use any harsh cleaning products, brushes with metal
or nylon bristles, or sharp or metallic cleaning materials such
as knives, hard scrapers or similar. They may damage the
surfaces.
Clean the device immediately after each work, otherwise sludge with leaf residues
will harden and may no longer be able to be removed without disassembling the
motor housing.
- Regularly clean the motor housing, tubes and ventilation slots with a soft brush
or cloth.
- Once a year, hand wash the collection bag in soapy water and allow it to air dry.
Cleaning and maintenance
25
To Next Page
Loading...
