Ferris 400S Series Dealer Setup & Adjustment Instructions

Not for
Reproduction
2 ferrismowers.com
Quick Setup List
Setup Procedures
 
Uncrate the unit.
 
Install the parking brake handle.
 
Connect bottom shock mount bolts.
 
Connect the battery cables.
 
Install the ground speed control levers.
 
Install the seat.
 
Check engine oil level.
 
Check / Fill transmission oil level.
 
Check tire pressures.
 
Check blade bolt and pulley bolt torque.
 
Check and level the mower deck.
 
Check the mower deck drive belt.
 
Lubricate all grease and oil points.
 
Check / Add fuel.
 
Start the engine
PERFORM THE SAFETY CHECKS
 
Check forLOOSE HARDWARE.
 
Check allOPERATOR CONTROLS.
 
PerformSAFETY INTERLOCK SYSTEM CHECK.
Register Product
 
To register the product: log ontowww.thepowerportal.com, select the appropriate brand, click “Sales &
Marketing”, select the “Product Registration” link, and then select “New Product Registration”. Fill out and submit
the online product registration form.
Ferris is a registered trademark of Briggs & Stratton
Corporation.

Ferris 400S Series Specifications

General

Transmission Type	Hydrostatic
Deck Construction	Fabricated
Caster Tires	13 x 6.5 - 6
Cutting Height	1.5 in
Deck Material	Steel
Drive Tires	20x10-8
Wheel Size	13 x 6.5 - 6