Need help?Do you have a question about the Ferrofish B4000+ and is the answer not in the manual?
General| Sound Generation | Digital |
|---|---|
| Drawbars | 9 drawbars per manual |
| Effects | Reverb, Rotary Speaker Simulation, Chorus, Vibrato |
| Connectivity | MIDI In/Out, USB |
| Presets | 128 Presets |
| MIDI | In/Out |
| Channels | Stereo |
| AD/DA Conversion | 24-bit |
| Controls | 9 drawbars, rotary encoders |
General welcome to the B4000+ and an overview of its features.
Information on obtaining software updates and related accessories.
Step-by-step instructions for powering on and connecting the B4000+.
Explanation of the device's user-friendly interface and parameter adjustments.
Details on sound generation, mixing, and external input.
Overview of the available audio effects like Rotor, Chorus, Reverb, Compressor.
How to access presets, save settings, and configure the system.
Using keys to assign drawbars to Pedal, Lower, and Upper registers.
Display of the six most important sound parameters for emulation.
Adjusts the volume of the characteristic 'spitty' click sound.
Controls the additive distortion occurring in drawbars.
Manages the amount of digitally modelled overdrive.
Simulates the degradation of tonewheels affecting sound quality.
Simulates quiet overtones caused by internal overlapping.
Adjusts the master tuning of the instrument.
How percussion is activated based on playing style.
Enables or disables the percussion effect.
Controls the overall volume of the percussion.
Changes the pitch of the percussion to match drawbars.
Controls the duration of the percussion sound.
Controls the decay time of the percussion.
How to mix Pedal, Lower, Upper registers and external input.
Adjusts the volume for the Pedal, Lower, and Upper registers.
Routing and volume control for signals fed into the Audio In plug.
Sets the treble and bass frequencies for the organ sound.
How the external input signal can be inserted at various points in the effects chain.
Adjusting rotor speeds (Slow, Fast) and controlling acceleration/braking.
Enables or disables the rotor effect.
Switching rotor speed between slow, brake, and fast.
Using MIDI modwheel and aftertouch to switch rotor speeds.
Widening the stereo image by adjusting microphone spacing.
Adjusting volume balance between bass and treble speaker microphones.
Adjusting the virtual distance between microphones and speakers.
Settings for bass speaker and treble horn rotor speeds.
Controls the slow rotation speed for the treble horn.
Controls the fast rotation speed for the treble horn.
Controls the acceleration when switching from slow to fast.
Controls the braking when switching from fast to slow.
Adjusts the overall tone color and resonance of the rotor effect.
Description of the Chorus and Vibrato effects.
Enables Vibrato for the upper and lower registers separately.
Controls effect strength using the data wheel settings.
Enables or disables the reverb effect.
Sets the mix between original (dry) and reverb sound (wet).
Sets the size of the simulated room for reverb.
Sets the amount of reverb fed back in the reverb loop.
Sets the frequency of the lowpass filter for reverb feedback.
Enables or disables the compressor.
Sets the strength of the compressor effect.
How to call up and select presets using knobs A and B.
Procedure for storing user-defined presets.
View drawbars and adjust volume during live performance.
Controls for simulation volume (Knob A) and output volume (Knob B).
Connecting drawbars to Pedal, Lower, and Upper registers.
Using key velocity to control note volume.
Controls the attack time of the organ signal.
Controls the decay time of the organ signal.
Simulates slower keyboard contact closure for a softer sound.
Adjusting MIDI channels, octave position, and keyboard splits.
Default MIDI channel settings for Upper, Lower, Pedal, and Ctrl.
Transposing registers by octave or half-steps and keyboard splitting.
Setting the threshold for using aftertouch to control rotor speed.
Enabling the Modwheel for controlling rotor speed.
Selecting function (Rotor or Sustain) for the switch input.
Configuring switch types: 2state, 3state, key, and invert.
Configuring volume pedal range and inversion.
Displaying firmware version and serial number.
Option to display MIDI values alongside potentiometer settings.
Inverting CC7/CC11 for volume/expression pedals.
Instructions on how to start the built-in demosong.
Stopping all currently playing notes.
Correct method for switching the B4000+ off to save settings.
Description of the Audio, Switch, and Pedal input plugs.
Statements regarding compliance with European and FCC regulations.
Confirmation of lead-free soldering and RoHS directive fulfillment.
Instructions for proper disposal and recycling of the device.
List of trademarks and their owners.
Information on the two-year warranty and its coverage.
Limitations of liability regarding documentation accuracy and use.
To Next Page