12
HP SETUP
HP SETUP
Accordingly, the ADAT and BNC
settings display the sample rate
detected at the corresponding
input.
Since ADAT cannot distinguish
between the different SMUX
settings, you can set them manually
here.
Here you can adjust the maximum
level of the headphone output.
Adjust to limit the maximum volume
of the headphones to protect your
ears.
Please note: depending on sample rates, the number of available ADAT
channels is as follows:
SMUX/1 16x16 channels
SMUX/2 8x8 channels
SMUX/4
up to 48 kHz
up to 96 kHz
up to 192 kHz 4x4 channels
To Next Page
Loading...
