To Next PageTo Next PageWhat does card parameter fault mean in Ferroli Boiler?
If your Ferroli Boiler displays 'Card parameter fault', it is likely due to a faulty gas valve or wrong card parameter setting. To resolve this, check the card parameter and modify it if necessary.
What causes Controller DBM32 fault in Ferroli DIVA F32?
If your Ferroli Boiler is showing a Controller DBM32 fault, it's likely due to an internal error. Check the earth connection and replace the controller if necessary.
Introduction to the boiler's function and features.
Details of the control panel, buttons, and display indicators.
Instructions for connecting to power, lighting up, and shutting down the boiler.
Procedures for adjusting boiler settings like temperature and modes.
Key requirements and qualifications for boiler installation personnel.
Guidelines for selecting a suitable and safe location for boiler installation.
Instructions and precautions for connecting the boiler's water circuits.
Procedure for safely connecting the boiler to the gas supply line.
Instructions and safety precautions for electrical power connection.
Installation guidelines for fume ducts, including baffles and connections.
Adjustments for gas conversion, test mode, burner pressure, and power.
Steps and checks required before and during boiler startup.
Guidance on periodical inspections and maintenance procedures for the boiler.
Troubleshooting guide for boiler faults and error codes.
Dimensions and connection points for the boiler models.
Diagrams illustrating the boiler's hydraulic circuits for heating and DHW.
Table of technical specifications and performance data for the boiler.
Pressure-flow diagrams and pump head/pressure loss curves.
Wiring diagram of the boiler's electrical components and connections.
General