Contents and general safety instructions
V
Festo GDCA-CHB-C-N en 1508e English
Intended use
The Festo Checkbox Compact
®
has been designed for use
under normal operating conditions in closed rooms in indus
trial installations.
The Checkbox documented in this description is intended
exclusively for use as follows: Contactless checking of the
position and quality of small parts e.g. screws, springs, bolts,
which pass through on a conveyor belt.
Use the Checkbox only as follows:
– As intended in an industrial environment
– In perfect technical condition
– In its original state without unauthorised modifications.
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
The guarantee will become invalid if the Checkbox is
opened.
The maximum values specified for pressures, temperatures,
electrical connections etc. must not be exceeded.
Please observe the standards specified in the relevant
chapters and comply with the regulations of the trade associ
ation and the German Technical Control Board (TÜV), the VDE
conditions as well as the relevant national regulations.
To Next Page
Loading...
