Contents and general safety instructions
VI
Festo P.BE−CPEA−CL−EN en 0711a
Intended use
The CPI modules described in this manual are intended
exclusively for use on a CP string on a CPI/CP master
(e.g.: CPX−CP interface, CP fieldbus node, CPV Direct).
The CPI/CP modules may only be used as follows:
as specified in industrial applications
without any modifications by the user. Only the conver
sions or
modifications described in the documentation
supplied with the product are permitted.
In perfect technical condition.
If used together with additional commercially available com
ponents, such as sensors and actuators, the specified limits
for pressures, temperatures, electrical data, torques etc.
must be observed.
Please comply with national and local safety laws and regula
tions.
To Next Page
Loading...
Need help?
General
