Festo CP-E08-M12-CL User Manual

5. Output module type CP−A08−M12−EL−Z
5−9
Festo P.BE−CPEA−CL−E N en 0711a
5.4.1 Connect external load supply
The output module CP−A08−M12−EL−Z is supplied via an exter
nal load supply 24 V to supply the actuators.
 Power must be supplied via a power supply unit that
meets EN 60204−1 / IEC204 (PELV power supply unit).
 Max. 0.5 A is available per channel.
 The outputs are designed to be short−circuit proof and
overload
proof channel−by−channel.

Festo CP-E08-M12-CL Specifications

General

Brand	Festo
Model	CP-E08-M12-CL
Category	Control Unit
Language	English