Festo CP-FB6-E - Page 16

Festo CP−FB6−E 0802f English16
2Configuration
Caution
The node contains elements which are liable to damage
by electrostatic charges.
The node can also be destroyed if the contact surfaces
of plug connectors are touched, or if the regulations for
handling electrostatically vulnerable components are
not observed.
Please observe the following when configuring:
1. Switch off the power supply.
2. Open the cover
for the DIL switch.
3. Switch valve test on/off.
4. Select error messages.
5. Set manufacturer−specific addressing.
6. Fix the cover for the DIL switch.