Festo CPX-FB43 - Safety; Safety Instructions

4
Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f
Safety
1 About this document
1.1 Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Contents
CPX system description CPX-SYS-... Detailed information on the CPX terminal
Brief instructions for bus node Essential information on the product
Operating instructions for bus node Detailed information on the product
Tab. 1: Applicable documents
1.2 Product version
This document refers to the following hardware version of the specified product:
Product Version
CPX-FB33 Bus node CPX-FB33 from revision 07
CPX(-M)-FB34 Bus node CPX(-M)-FB34 from revision 07
CPX(-M)-FB35 Bus node CPX(-M)-FB35 from revision 07
CPX-FB43 Bus node CPX-FB45 from revision 45
CPX(-M)-FB44 Bus node CPX(-M)-FB45 from revision 45
CPX(-M)-FB45 Bus node CPX(-M)-FB45 from revision 45
Tab. 2: Product versions
Information on the revision levels of the product
è
4.2.2 Product variants.
There may be an updated version of this document for this or later product versions
è
www.festo.com/sp.
2 Safety
2.1 Safety Instructions
–
Only use the product in original status without unauthorised modifications.
–
Only use the product if it is in perfect technical condition.
– Observe labelling on the product.
– Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure that
storage times are kept to a minimum.
–
Before working on the product, switch off the power supply and secure it against being switched on
again.
– This product can generate high frequency malfunctions, which may make it necessary to implement
interference suppression measures in residential areas.
–
Comply with the handling specifications for electrostatically sensitive devices.