SDAT-MHS
6 Festo – SDAT-MHS – 2017-11f English
2 Function and application
The position transmitter SDAT-MHS is intended for contactless recording of the piston position of mag
netically detectable drives and grippers. It is appropriate for use with Festo drives with T-slot (profile
slot 8) as well as round cylinders and tie-rod cylinders with mounting kits.
Use the SDAT-MHS only for the suitable drives and grippers from Festo è www.festo.com/
catalogue.
The position transmitter SDAT-MHS records the magnetic field of the piston magnet and continuously
senses the piston movement in the sensing range.
Available output signals include:
– analogue current signal (4…20 mA)
– programmable switching output (24 V),
– IO-Link communication mode (è Chapter 2.3).
To Next Page
Loading...
