Need help?Do you have a question about the Festo SPC11 Series and is the answer not in the manual?
General| Input voltage | 24 V DC |
|---|---|
| Current consumption without load | 100 mA |
| PLC Functionality | Yes |
| Degree of protection | IP20 |
| Digital output type | PNP |
| Output current | 0.5 A |
| Short circuit strength | Yes |
| Storage temperature | -20 ... +70 °C |
| Relative humidity | 5% to 95% (non-condensing) |
| Communication interface | RS232 |
Provides an overview of fitting and pneumatic installation with an example diagram, detailing key components and connections.
To Next Page
