26
KS 60 E
The illustrations specified are located at the
beginning of the operating manual.
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and
safety notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not look directly at the light.
Do not dispose of as domestic waste.
Direction of rotation of saw and the
saw blade
b
Saw blade dimensions
a ... Diameter
b ... Locating bore
Tip or advice
Handling instruction
Symbol Significance
Safety class II
Disconnect from the power supply!
Hazardous area! Keep hands away!
Warning: hot surface!
Risk of pinching fingers and hands!
Danger of injury by free-moving saw
blade
2 Safety instructions
2.1 General safety instructions for power
tools
WARNING Read all safety instruc-
tions, other instructions and technical data
provided with this power tool, and take a look at
the illustrations. Failure to observe the following
instructions may lead to electric shocks, fires and/
or serious injuries.
Keep all safety and other instructions in a safe
place for future reference.
The term “power tool” used in the safety instruc-
tions refers to mains-powered power tools (with
power cable) and battery-powered power tools
(without power cable).
1 OCCUPATIONAL SAFETY
s. Keep your working area clean and well-lit. Un-
tidy, unlit working areas may lead to accidents.
t. Do not operate the power tool in a potentially
explosive environment containing flammable
fluids, gases or dust. Power tools generate
sparks that may ignite dust or vapours.
u. Keep children and other persons away from
the power tool during use. If you are distracted,
you may lose control of the tool.
v. Never leave the power tool unattended. Only
leave the power tool when the insertion tool has
come to a complete halt.
2 ELECTRICAL SAFETY
a. The connector plug on the power tool must fit
in the socket. The plug must not be modified
in any way. Do not use adapter plugs together
with earthed power tools. Unmodified plugs
Original operating instructions
Table of contents
1 Symbols .....................................................26
2 Safety instructions .....................................26
3 Intended use ..............................................30
4 Technical data ............................................30
5 Machine features .......................................31
6 Commissioning ..........................................31
7 Settings ......................................................32
8 Working with the electric power tool ........34
9 Service and maintenance ..........................37
10 Accessories ................................................38
11 Environment ..............................................39
To Next Page
Loading...
