Festool TKS 80 EBS - English; Safety Warnings; Symbols

Contents
1 Symbols..................................................... 24
2 Safety warnings.........................................24
3 Intended use..............................................29
4 Technical data........................................... 30
5 Parts of the device.....................................30
6 Set-up/start-up......................................... 30
7 Transportation...........................................32
8 SawStop technology.................................. 32
9 Additional settings/functions....................35
10 Working with the electric power tool........39
11 Storage...................................................... 40
12 Service and maintenance..........................40
13 Accessories............................................... 41
14 Environment..............................................41
15 Contact...................................................... 41
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Wear protective goggles.
Do not remove the sticker.
Direction of rotation of saw and the
saw blade
Wood
Laminated wooden panels
Aluminium, plastic
Adjustment marking for storing the
preset profile setting rail
Handle area
Position markings for sliding table
plastic holders
SawStop technology
Ø 254 mm
Saw blade diameter
>2.2 mm
<1.8 mm
Cutting width and standard blade
thickness
3mm
SawStop
When sawing cutting widths of ≤ 3 mm,
the SawStop technology is triggered or
the TKS 80 EBS does not start.
The saw blade and cartridge must not
touch!
Electronics with adjustable, constant
speed and temperature monitoring
STOP
Electro-dynamic run-down brake
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Clut
tered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
English
24