Festool TKS 80 EBS - Parts of the Device; Set-Up;Start-Up; Technical Data

– Saw blade dimensions: 254 x 30 x 2.4 mm
– Cutting width > 2.2 mm (corresponds to the
tooth width)
– Locating bore, dia. 30 mm
– Standard blade thickness < 1.8 mm
– Saw blade with chip angle of ≥ 15°
– Suitable for speeds of 3500 min
-1
or above
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
Saw blades made of high-alloy high-speed steel
(HSS steel) must not be used.
3.2 Cartridges
Only use Festool cartridges that are designed
for use in this power tool.
4 Technical data
Bench-mounted circular saw TKS 80 EBS
Power
TKS 80 EBS 220 V 2200 W
Speed (no-load) 1700–3500 min
-1
Locating bore Dia. 30 mm
Cutting height at 90°/45°/47° 0–80 mm/0–56 mm/0–54 mm
Mitre angle -2°–47°
Table dimensions (L x W) 690 x 580 mm
Table height, legs unfolded 900 mm
Table height, legs folded away 375 mm
Weight as per EPTA procedure 01:2014 37.0 kg
5 Parts of the device
[1-1]
Accessory holder
[1-2]
Side handle areas
[1-3]
4 V-profiles
[1-4]
Spacer wedge for grooving
[1-5]
Table insert
[1-6]
Spacer wedge with protective cover
support
[1-7]
Protective cover
[1-8]
Safety sticker
[1-9]
Preset profile setting rail
[1-10]
Fine adjustment
[1-11]
Mitre angle setting
[1-12]
Rotary knobs for foldaway legs
[1-13]
Scale
[1-14]
Cutting height setting
[1-15]
Angle indicator
[1-16]
Push stick holder
[1-17]
Foldaway legs
[1-18]
Closing flap
[1-19]
Switch panel
[1-20]
Transport rollers
[1-21]
Shipping protection
The illustrations specified are located at the be
ginning and end of the operating instructions.
6 Set-up/start-up
CAUTION
Heavy transport packaging with bench-
mounted circular saw
Risk of injury
► The transport packaging with the bench-
mounted circular saw must be carried and
unpacked by two people.
English
30