31
You can use this remote control to operate your TV as well as your Fetch TV Box.
If your Fetch TV remote control has different buttons to the one shown above or if your TV brand is not listed
on screen when you follow the steps above, you will need to refer to the Universal Remote Set Up Guide on
www.fetchtv.com.au.
Press and hold for 3 seconds until Fetch TV Box LED illuminates. Your TV will now show a table of
brands.
Press and hold the matching number on the remote control for your brand of TV.
As soon as TV turns off, stop pressing the remote. LED will blink twice. Your TV is now set up.
1
3
2
Set up for Universal Remote
Using a different Fetch TV remote?
To Next Page
Loading...
