Fetch Mini 4K - Step 4. Connect to your TV

11
Plug the HDMI cable into the port labelled HDMI on the back of the Fetch Mini 4K.
Plug the other end into a free HDMI port on your TV.
1
2
The Fetch Mini 4K connects to your TV using HDMI (High Definition Multimedia Interface). Only the HDMI cable
is needed.
To watch content in 4K HDR on your Fetch Mini 4K, you’ll need:
• A connected 4K HDR TV
• A steady home broadband speed of 15-25 Mbps
• Video setting set to Auto (4K – 2160P) on your Fetch Mini 4K (you can do this later at Menu > Manage >
Settings > Audio & Visual > Video)
Your TV and home theatre equipment such as audio video receiver or sound bar if using, also need HDMI inputs
that support 4K and HDMI 2.0/HDCP 2.2 signals. Check your TV manual for more info.
To watch High Dynamic Range (HDR) if your TV supports this, enable the option on your TV first and then on
your Fetch Mini 4K at Audio & Visual > Advanced > HDR Mode. Different TVs may use other names like “Ultra”
or “Deep Colour”.
Step 4. Connect to your TV