13
Connect to your home Wi-Fi network
Your Fetch Mini 4K will check your connection to the Internet and prompt you if you need to connect. If you are
already connected there is no need to set up Wi-Fi. If you are connecting using Wi-Fi:
Remote Pairing
Your Fetch Mini 4K will pair the Bluetooth Voice remote during the start up process. You shouldn’t need to do
anything but if that didn’t work you can pair later at Menu > Manage > Settings > Remote Control.
Choose ‘Wi-Fi Connection’ and follow the prompts.
Select your home network from the list of in range networks. If needed, confirm the security settings.
Your Fetch Mini 4K will let you know once you’re connected then continue to start up.
1
2
3
This is the home stretch where you activate your Fetch service and get it all happening. It will take a few
minutes for your Fetch Mini 4K to move through three loading screens and the screen may go black between
each one. Don’t worry, this is normal. Once finished simply follow the instructions on the Welcome Screen.
Step 6. Start up
To Next Page
Loading...
