12
Once you’ve completed all the steps and put the batteries in your remote control it’s time to turn everything on.
Connect your Fetch Mini 4K to power
Check the Fetch Mini 4K Connection
Turn on your Fetch Mini 4K
Turn on the Power at the wall socket. The power light
on your
Fetch Mini 4K will light up.
Standby light is blue when your Fetch Mini 4K is powered
on. If it is red, the box is in standby mode and you should
press the power button on the remote control to turn it on.
Internet light on your Fetch Mini 4K is blue when you
have a broadband connection. If it is red, there is no live
connection. During initial start-up it will change from red to
blue.
Paw light on your Fetch Mini 4K will flash when you press
any button on the remote. If it doesn’t flash the box is not
responding to the remote.
Select Source / Input on TV
Plug the red end of the power supply unit into the Fetch Mini
4K.
Plug the power supply unit into the wall power socket.
Turn on your TV.
On your TV remote press Source/Input or AV Select.
Select the HDMI port you plugged your Fetch Mini 4K into.
1
1
2
2
3
Step 5. Power up
To Next Page
Loading...
