ENGLISH (Translated from original language)
Espresso Coffee Machines Compass MB by fiamma51
2. Within 30 seconds, press the water portion key. Key 5 stays lit.
3. When the desired amount of water has been produced, press the hot water key again. The
electronic automatically memorizes the amount of water used.
4. In order to program the second hot water portion, click key 5 twice and then keep it pressed
before repeating steps 2-3
In case a Time-Out occurs during programming (after 30 s without activity), repeat all the steps 1
to 3 described above.
The programmed keys stay turned off when returning to programming. This does not prevent a new
programming.
6.3. Programming of the steam temperature (only for machines with the optional
“Auto Steam”
1. Use a cup or glass with ca. 300 ml capacity and an external temperature probe (see image below)
2. Press key 5 on group 1 (leftmost) and keep it pressed for 5 seconds. The display shows:
Now press the steam key
To Next Page
Loading...
Need help?
General
